Tel.: +34 934 545 393   info@reverteminerals.com    

Construction

Construction

construccion-aplicaciones-reverte-carbonatos-calcio-300x213

All of Reverté’s calcium carbonates recommended for mortars and adhesive cements comply with the EN 13139 standard (CE marking).

We have specific qualities for white cement, plasters and concretes that make it possible to reduce the consumption of cement and plaster in the formula.

Mortars and adhesive cements

Advantages

  • Compliance with the EN 13139 standard (CE)
  • High whiteness
  • Very good machinability
  • Calibrated and consistent granulometric distribution
  • Absence of sulphates and sulphur (pyrrhotite)
  • Absence of organic material
  • No reactivity with alkalis
  • Reduction in plaster cost
  • Cement reduction in concretes

Products

GRANIFORT® 2 (extra white marble)

D50 = 1.5 mm  –  D98 = 2 mm

Main Advantages
Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

GRANIFORT® 1 (extra white marble)

D50 = 0.8 mm  –  D98 = 1.2 mm

Main Advantages
Complies with the EN 13139 standard (CE marking). Very good machinability due to the spherical morphology of the particles. High whiteness. Well-calibrated and consistent granulometric distribution
Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

GRANIFORT® 05 (extra white marble)

D50 = 250 microns  –  D98 = 800 microns

Main Advantages
Complies with the EN 13139 standard (CE marking). Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

GRANIFORT® 04 (extra white marble)

D50 = 200 microns  –  D98 = 500 microns

Main Advantages
Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

GRANIFORT® 02 (extra white marble)

D50 = 90 microns  –  D98 = 200 microns

Main Advantages
Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

F 50 (extra white marble)

D50 = 22 microns  –  D98 = 120 microns

Main Advantages
Filler. Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

F15 (extra white marble)

D50 = 9 microns  –  D98 = 50 microns

Main Advantages
Filler. Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
High whiteness. Well-calibrated and consistent granulometric distribution. Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

TIPO F

D50 = 20 microns  –  D98 = 200 microns

Main Advantages
Filler. Complies with the EN 13139 standard (CE marking).
Very good machinability due to the spherical morphology of the particles.
Well-calibrated and consistent granulometric distribution
Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

T 50

D50 = 7 microns  –  D98 = 40 microns

Main Advantages
Filler. Complies with the EN 13139 standard (CE marking). Very good machinability due to the spherical morphology of the particles.
Well-calibrated and consistent granulometric distribution
Absence of sulphates, sulphur (pyrrhotite) and organic matter.
No reactivity with alkalis.

BL 50

D50 = 6 microns –  D98 = 30 microns

Main Advantages
Rubber extender.
Helps maintain the compression set.

Other applications

Advantages

  • Compliance with the EN 13139 standard (CE)
  • High whiteness
  • Very good machinability
  • Calibrated and consistent granulometric distribution
  • Absence of sulphates and sulphur (pyrrhotite)
  • Absence of organic material
  • No reactivity with alkalis
  • Reduction in plaster cost
  • Cement reduction in concretes

Products

TIPO F

D50 = 20 microns  –  D98 = 200 microns

Main Advantages
Additive for the production of white cement.
Adds whiteness.

F-15 (extra white marble)

D50 = 9 microns  –  D98 = 50 microns

Main Advantages
Filler for plaster production.
Cost reduction.
High whiteness.

MICRAL® 10 (extra white marble)

D50 = 5 microns  –  D98 = 30 microns

Main Advantages
Filler for plaster production.
Cost reduction.
Very high whiteness.

T 50

D50 = 7 microns  –  D98 = 40 microns 

Main Advantages
Filler for the production of waterproofing, sound proofing, roofing felt and white brick.

BL 50

D50 = 6 microns –  D98 = 30 microns

Main Advantages
Rubber extender.
Helps maintain the compression set.