Paints and coatings
Reverté’s calcium carbonates make it possible to obtain an excellent balance between the optical and mechanical performance of any type of formulation.
By selecting the most suitable products, it is possible to enhance properties such as opacity, gloss, whiteness and resistance to rubbing without increasing the formulation costs.
Ultra-micronised grades make it possible to minimise the consumption of titanium dioxide and other extenders, as well as precipitated carbonates (PCC) and calcined clays.
In solvent systems and powdered paints, the range of surface-treated products provides minimal demand for binder, while providing hydrophobicity and perfect dispersion.
Advantages
HIGH PVC PAINTS
- High whiteness
- Low resin demand
- Low sheen
- Resistance to wet rubbing
- Substitution of TiO2 extenders (PCC, calcined kaolin)
LOW PVC PAINTS
- High whiteness
- TiO2 extender
- Substitution of TiO2 extenders (PCC, calcined kaolin)
- High shine
- Low resin demand
Decorative paint Extra-white marble
Products
MICRAL® TIXTENDER
D50 = 0.7 microns – D98 = 4 microns
Main Advantages
Maximum ability to extend TiO2.
Substitution of TiO2 extenders (PCC, calcined kaolin, etc.)
MICRAL® OPAC EXTRA
D50 = 0.8 microns– D98 = 4 microns
Main Advantages
High ability to extend TiO2.
Substitution of TiO2 extenders (PCC, calcined kaolin, etc.)
MICRAL® 1
D50 = 1.8 microns – D98 = 7 microns
Main Advantages
Good ability to extend TiO2.
Partial substitution of TiO2 extenders (PCC, calcined kaolin, etc.)
MICRAL® 2
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
Glossy finish with high whiteness and low binder demand.
MICRAL® EXTRA
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
Matt finish with good coating ability, low binder demand, and good resistance to wet rubbing with high PVC.
MICRAL® 5
D50 = 5 microns – D98 = 28 microns
Main Advantages
Matt finish with good coating ability, low binder demand, and good resistance to wet rubbing with high PVC.
MICRAL® 10
D50 = 7 microns – D98 = 38 microns
Main Advantages
For the formulation of very matt paints (minimum sheen), high whiteness, very low binder demand and good resistance to wet rubbing with high PVC.
Decorative paint White calcite
Products
MICROCARB® 95
D50 = 0.65 microns – D98 = 3 microns
Main Advantages
Maximum ability to extend TiO2.
Substitution of TiO2 extenders (PCC, calcined kaolin, etc.)
MICROCARB® 60
D50 = 2.5 microns – D98 = 9 microns
Main Advantages
Semi-matt finish, high opacity and low binder demand.
CALFORT® 3
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
Semi-matt finish, good opacity and low binder demand.
CALFORT® 5
D50 = 5 microns – D98 = 22 microns
Main Advantages
Matt finish with good coating ability, low binder demand, and good resistance to wet rubbing with high PVC.
Solvent-based paint Extra-white marble
Products
MICRAL® TIXTENDER
D50 = 0.7 microns – D98 = 4 microns
Main Advantages
For high gloss enamels
Maximum gloss and ability to extend TiO2.
Substitution of other more expensive TiO2 extenders such as PCC, calcined kaolin, etc.
MICRAL® OPAC EXTRA
D50 = 0.8 microns – D98 = 4 microns
Main Advantages
For high gloss enamels
High gloss and ability to extend TiO2.
Substitution of other more expensive TiO2 extenders such as PCC, calcined kaolin, etc.
MICRAL® 1
D50 = 1.8 microns – D98 = 7 microns
Main Advantages
For semi-gloss enamels
Good opacity.
CALCIPORE® 180T AL
D50 = 1.8 microns – D98 = 7 microns
Main Advantages
For semi-gloss enamels
Good opacity.
Very easy to disperse in solvent base.
MICRAL® 2
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
For semi-gloss enamels.
Good opacity.
MICRAL® 3T
D50 = 3 microns – D98 = 14 microns
Main Advantages
Main Advantages
For semi-gloss enamles
Good opacity.
Very easy to disperse in solvent base.
CALCIPORE® 160T AL
D50 = 2.5 microns – D98 = 9 microns
Main Advantages
For glossy enamels
Good opacity.
Very easy to disperse in solvent base.
MICRAL® EXTRA
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
For matt enamels
MICRAL® 2T
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
For matt enamels
Very easy to disperse in solvent base.
MICRAL® 10
D50 = 7 microns – D98 = 38 microns
Main Advantages
For primers
Powdered paint
Products
MICRAL® OPAC EXTRA
D50 = 0.8 microns – D98 = 4 microns
Main Advantages
High gloss powder coatings
MICRAL® 1
D50 = 1.8 microns – D98 = 7 microns
Main Advantages
Semi-gloss powder coatings
MICRAL® 2
D50 = 3.5 microns – D98 = 14 microns
Main Advantages
Matt powder coatings
Road paint
Products
MICRAL® 10
D50 = 7 microns – D98 = 38 microns
Main Advantages
Very high whiteness. Extender for other fillers.
F-15
D50 = 9 microns – D98 = 50 microns
Main Advantages
Low surface roughness.
F-50
D50 = 22 microns – D98 = 120 microns
Main Advantages
High whiteness.
Medium surface roughness.
